The Saddle Roofs are designed to be set up on single steel bases which can be connected with a compression beamwhich reduces the ballast requirements or can be set up with integrated bases (ballast safes) in any kind ofsteel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies canbe either in full PVC or the wind through mash

.

This roof meets all the required international standards and has been pre-calculated andcomes with a full structural report and manual according the most recent regulations.Naturally PA Wings and Side Houses are available.

The SR40 Roof consist of a ST Ground Support on six TD35 Towers and a Roof Structure 0f ST Truss.

The SR40 Roof is a tower based structure with a saddle roof. These saddle roofs have a standard impressive load bearingST Main Rig and the gable and have a fixed angle which enables you to re-build the roof in various dimensions. The standardSR40 ST Roofs are available in20x14m, 18x14m, 16x12m and 14x12mall on six TD35 Towers. The 20x14m and 18x14mroofs have an additional center back tower to enhance the load bearing capacity and maintain the required clearance.

Product features

• Tower:TD 35
• QTE (Towers):6
• Main Rig:ST
• Roof Structure:ST
• PA Wing possible:Yes
• Compression:optional
• Max. Load PA Wing:2000Kg
• Width:15,01m
• Clearance:10,6m
• Depth:11,87m
• Max. PL:6600Kg
• Max. UDL:8300Kg

• Tower:TD 35
• QTE (Towers):6
• Main Rig:ST
• Roof Structure:ST
• PA Wing possible:Yes
• Compression:optional
• Max. Load PA Wing:2000Kg

• Tower:TD35 / HD34
• QTE (Towers):6+1
• Main rig:ST
• Roof Structure:ST
• PA Wing possible:Yes
• Compression:Yes
• Max. Load PA Wing:2000Kg
• Width:19,01m
• Clearance:10,60m
• Depth:13,87m
• Max. PL:7100Kg
• Max. UDL:10500Kg